Cornell ORIE M.Eng 2024-2025 Handbook (2024)

1. File a study plan with the Graduate Field Administrator at the beginning of each semester detailing all courses in which you are enrolled or intend to enroll for that term. The plan template is found on the Resources page. Your study plan must be approved by your academic advisor.
2. Fulfill ORIE Core course requirements. You must successfully complete:
1. 12 or more credit hours of Core coursework; comprised of:
1. 3 or more credits hours in each Core category:

• Optimization Modeling
• Stochastic Modeling
• Data Science and Statistical Modeling

Two courses are considered foundational for Optimization Modeling and Stochastic Modeling. These are ORIE 5300 and ORIE 5500. We recommend that all students new to ORIE take both prior to (or concurrently with) other core or concentration classes. ORIE 5300 is a prerequisite for most courses in the Optimization Modeling category, and ORIE 5500 is a prerequisite for most courses in the Stochastic Modeling category and the Data Science and Statistical Modeling category.

Listings of all eligible Core courses may be found in Appendices A-C. Although certain courses appear in multple categories, a student may count a course in at most one of the categories.

1. Specific exceptions to this rule are found within Section III, detailing individual Concentrations.

1. If your previous institution is Cornell University, please see the relevant discussion under Policies and Procedures.

1. Financial Engineering: You must take this course in your first Fall semester - it is not available at CFEM.
2. Early and/or Spring Admits whose schedules make ORIE 5915 an impossibility must work with the MEng or CFEM Director to determine an appropriate substitute.

1. Financial Engineering: ORIE 5210, taken during your CFEM semester.
2. Operations Engineering: ORIE 5920 (formerly ORIE 9100), taken during your Spring semester.

NOTE:These are the only two courses that you may take Pass/Fail (S/U) that count towards your degree. All other courses must be taken for a letter grade.

1. ORIE 5100: Manufacturing Systems Design: A Consulting Boot Camp is a 4-credit course that also fulfills Stochastic Modeling Core requirements.
2. ORIE 5110: Case Studies is a 1-credit course that only fulfills the Project Preparation requirement.
3. Financial Engineering: You do not have to fulfill this requirement.

Most technical courses at Cornell offered by the College of Engineering, the College of Computing and Information Science (CIS), and the Department of Mathematics that are numbered 5000 or above, and taken for letter-graded credit, may be allowed to count toward the ORIE Master of Engineering degree, subject to core and concentration requirements. However, exceptions apply. Please refer to the sections below and appendices for details.

Courses that are not allowed to count toward the ORIE MEng Degree include:

• Courses numbered at the 4000-level or below (these are undergraduate courses);
• Any course that is substantially similar to one you have already taken at Cornell or elsewhere (for credit or audit);
• Teaching Courses

Courses that are permitted only if petitioned for:

• Any SCJ course not found in the Appendices under O: Approved Business Courses or your concentration;
• This includes all courses beginning with NBA, HADM, and ENMGT.
• Any course found in Appendix P;
• Any courses outside of Engineering, CIS, and Math.

You must successfully complete an approved engineering design project. MEng projects are team-based and have industrial, financial, or government-related organizations as partners and/or sponsors. The specific goals and expectations for MEng projects will be presented prior to team assignment. You will be able to rank the projects in the order of your preference, which will be considered during team assignment.

For all projects, your group must submit a final written report signed by your faculty project advisor, and deliver a final oral presentation to the partner organization.

Project Courses are designed so that you receive 5 credits for your workload, typically 1 credit in the Fall and 4 in the Spring.

Precisely which courses you should enroll in (and when) will vary by your concentration and matriculation path.

1. For standard matriculants, follow these guidelines:
1. Operations Engineering (except for Strategic Operations and Systems Engineering):

• Fall: ORIE 5980 (1 credit)
• Spring: ORIE 5981 (4 credits)

• CFEM: ORIE 5220 (5 credits)

• Spring: NBA 6500

• Fall: SYSEN 5900 (3 credits)
• Spring: SYSEN 5900 (3 credits)

1. OE Spring Admits: You may enroll in ORIE 5980 during the Fall semester before your matriculation and transfer the credit to your MEng degree if and only if those credits will not be counted towards your Undergraduate Degree requirements. If you are unable to take ORIE 5980 either because of scheduling or enrollment issues, enroll in ORIE 5981 in the Spring for 5 credits.
2. OE Early Admit Pathway: If your hybrid semester is in the Fall, you may enroll in ORIE 5980 during that semester. Those credits must not be counted towards your Undergraduate Degree requirements. If your hybrid semester is in the Spring, or you are unable to take ORIE 5980 in the Fall because of scheduling or enrollment issues, enroll in ORIE 5981 in the Spring for 5 credits.
3. FE Spring/Early Admits: You will always participate in CFEM, so you will enroll in ORIE 5220 for 5 credits during your CFEM semester.

Full commitment, participation, and teamwork are expected of all students.

This section outlines miscellaneous requirements that you must fulfill to receive your Master of Engineering degree in ORIE.

1. Good Academic Standing - You are expected to maintain good academic standing throughout your degree program and must achieve it to graduate. To attain good standing, you must:
1. Satisfy all prerequisites prior to beginning the program;
2. Carry a course load that enables you to complete the program without unecessary delay, including credit hour requirements outlined above;
3. Achieve a grade point average (GPA) of 2.50 or better in each semester;
4. Achieve a cumulative GPA of 2.50 or better across all courses satisfying the requirements of the MEng Degree;
5. Attain a C- or better in every graded course taken; and
6. Resolve any incomplete course grade within one semester of the submission of the incomplete.

Cornell uses a grading system with "+" and "-", and assigns decimal grade points to grades as folows:

Grade	Point Value
A+	4.3
A	4.0
A-	3.7
B+	3.3
B	3.0
B-	2.7
C+	2.3
C	2.0
C-	1.7
D+	1.3
D	1.0
D-	0.7
F	0

If you fail to maintain good academic standing during a term, you will be notified of your status in writing and will be invited to meet with appropriate ORIE faculty to discuss the situation. Extremely poor performance – for instance, failing to meet three or more of the criteria for good standing – may lead to a mandatory leave of absence from the MEng program at the discretion of the MEng Program Director. This includes students who enter the ORIE MEng program with prerequisite deficiencies and subsequently fail to attain good academic standing during the first term. Students who fail to attain good academic standing for two consecutive semesters typically will be asked to withdraw from the MEng program.

2. MEng Exit Survey - You must complete the mandatory MEng Exit Survey administered by the College of Engineering, which will be provided near the completion of your degree. This survey must be completed to receive your degree.

This section outlines additional prerequisites and course requirements for each concentration and minor associated with the ORIE MEng program. Upon enrolling in a concentration, you must provide an attestation and/or certificate or transcript verification that you have successfully completed the necessary prerequisite coursework at a degree granting institution. In creating your study plans, note that certain courses may not be offered every year.

Any requirements listed are in addition to those listed in Section II, the overall program requirements.

Applied Operations Research
The Applied Operations Research concentration (AOR) is the most general of the concentrations and allows the most flexibility with respect to elective courses. The AOR concentration is appropriate for students with undergraduate degrees in ORIE who want to increase the breadth of their exposure to operations research and its applications, as well as for those with undergraduate degrees in other fields who want to gain a solid foundation in the theory and practice of ORIE.
1. Additional Prerequisites: None.
2. You must complete 12+ letter-graded credit hours of approved ORIE department-labelled coursework. This excludes:
1. Project courses (ORIE 5980/5981)
2. Practicum courses (ORIE 5915)
3. Colloquium courses (ORIE 5920)
4. Independent study courses
3. You may "double-count" courses taken to satisfy your Core requirements.
Data Analytics
The Data Analytics (DA) concentration focuses on the theory and tools needed to make fact-based, data-driven decisions associated with the development, pricing, promotion, and distribution of ideas, goods, and services. Students admitted to the DA concentration who have not completed the prerequisites will be assigned to the AOR concentration until the prerequisites are met. Some students may need three semesters to complete the DA concentration due to elective course prerequisites, enrollment limits, or the timing and sequence of course offerings.
1. Additional Prerequisites: You must complete a two-semester sequence of calculus-based probability and statistics theory, similar in content and rigor to Cornell courses ENGRD 2700 and ORIE 3500. Courses in which probability and statistical methods are used, but where theory is not the primary focus are not acceptable substitutes, nor are professional exam credentials (e.g., CFA, FRM).
2. You must complete 3 or more concentration-specific courses, which total to 9 or more credit hours.
1. One course must come from the Data Science and Statistic Modeling Core List (Appendix C). This effectively means that you must take 2 separate DSSM Core classes - one to satisfy the program requirements, and one to satisfy your concentration requirements.
   Cornell Undergraduates: If you choose to waive the DSSM Core, you may not apply any waived credits towards your concentration requirements. If you do not waive the DSSM core, you may apply 3 credits towards your concentration requirements, provided that they follow the guidelines laid out in Policies and Procedures.
2. One course must come from the Data Analytics Electives List (Appendix D).
3. At most 3 credits may come from SCJ courses.
3. You may not take ORIE 5500 or STSCI 5090 for MEng credit: these courses duplicate the prerequisites necessary for admission into this concentration.
Financial Engineering
The Financial Engineering concentration (FE) prepares students for careers that involve the quantitative analysis and management of financial instruments and risk. Such jobs frequently involve: (1) mathematical modeling and analysis of stocks, bonds, options, currency exchange rates, and other structured products; (2) developing quantitative models to help corporations understand and manage their exposure to risk; and/or (3) implementing algorithms to monitor, price, and trade financial instruments. As such, the concentration enables students to gain deep and broad knowledge of financial markets and investment strategies and innovations. FE is specifically designed to be a three-semester concentration (Fall-Spring-Fall), with the third semester taking place at Cornell Financial Engineering Manhattan (CFEM) in New York City.
In certain cases, and capacity-permitting, it may be possible for well-prepared Cornell ORIE undergraduates to complete the FE program in two semesters (starting in the spring and finishing at CFEM the following fall). Please consult the MEng Director for eligibility and details.
You will receive a Dean's Certificate in Financial Engineering in addition to your diploma on successful completion of this concentration.
1. Additional Prerequisites:
1. A sequence of calculus-based probability, statistics, and stochastic processes, similar in content and rigor to Cornell courses ENGRD 2700, ORIE 3500, and ORIE 3510. Courses in which probability and statistical methods are used, but where theory is not the primary focus are not acceptable substitutes, nor are professional exam credentials (e.g., CFA, FRM).
2. An introductory finance course with a strong focus on mathematics, not economics or accounting.
3. It is strongly recommended that you have experience with differential equations at least at the level of Cornell course MATH 2930.
4. Python and/or C++ are the preferred coding languages for FE students.
2. You must complete 12 or more letter-graded credit hours of coursework from the Financial Applications Electives (Appendix E) list.
1. 6 or more credit hours must be earned during your CFEM semester, via courses numbered 52XX.
   This does not include your Project course, ORIE 5220.
   ORIE 5252-5257 are "Special Topics" courses and are taught by professionals affiliated with CFEM. Topics vary from year to year.
   ORIE 5258: Python for Finance, is designed for first-semester FE students located in Ithaca. It is not part of the Special Topics sequence and can not be taken while at CFEM.
2. Any courses taken for Financial Applications credit may not count towards your Core requirements.
3. You may not take ORIE 5500 or STSCI 5090 for MEng credit: these courses fulfill the prerequisites necessary for admission into this concentration.
4. You may not take ORIE 5510 for Stochastic Modeling core credit, but you may count it towards the 30 credits necessary for your MEng degree.
5. You may not take ORIE 5630 for DSSM core credit, but you may count it towards your Stochastic Modeling core.
6. You must complete the CFEM Exit Surveyin addition to the MEng Exit Survey. This will be provided near the end of your CFEM semester. It must be completed to receive your degree.
C*. Financial Data Science (FDS) Certificate
If you are interested in data science, you may complement your studies with the FDS Certificate by fulfilling the requirements below. All must be succesfully completed for letter-graded credit.
This framework is designed to enable you to add value to an organization immediately by cultivating critical skills in big data collection, manipulation, storange, and access, as well as machine learning theory, algorithm implementation, and evaluation.
1. Complete ORIE 5270: Big Data Technologies, which is offered in the Spring for 2 credits and is foundational for the framework.
2. Complete at least one course listed in Appendix F.
   Some of these courses are also permitted to satisfy Core or Elective requirements.
3. Complete an FDS-eligible Special Topics course while at CFEM.
   The eligible courses will be announced prior to enrollment in your CFEM semester, and still apply to your Elective requirements.
4. Complete an FDS-eligible Project while at CFEM.
   The eligible projects will be announced prior to your enrollment in your project section.
5. Participate in non-credit-bearing workshops while at CFEM.
   Details will be announced as they become available.
Information Technology
The Information Technology (IT) concentration prepares students to participate in the development, acquisition, and integration of information systems (particularly those embodying OR approaches) to ensure that strategic business needs are satisfied. Students who elect this concentration will be introduced to the essentials of information technology and ways to design and manage IT transformations.
1. Additional Prerequisites: None.
2. You must complete 4 or more concentration-specific courses, which total to 12 or more credit hours.
   One course must come from each of the 3 following categories:
   1. Technology and Infrastructure (Appendix G)
   2. Information Economics and Strategy (Appendix H)
   3. Managing IT Implementation (Appendix I)
   The remaining course may come from any of those areas, or from the Additional IT Electives list (Appendix J).
3. At most 1 course may be counted towards both the ORIE Core and an IT Elective requirement.
Manufacturing and Industrial Engineering
The Manufacturing and Industrial Engineering concentration (MIE) prepares students to use their operations research skills to improve manufacturing environments and associated processes across the supply chain network. This concentration covers aspects of design, production, and distribution of goods and services, as well as fundamentals of modern manufacturing technology including computer-aided design, analysis, and management of manufacturing processes. Students admitted to the MIE concentration are expected to have a working knowledge of probability and statistics as well as strong disciplinary credentials. Industrial experience is advantageous but not required.
You may find tht you need an additional semester to finish both the MEng degree requirements as well as the Concentration requirements.
1. Additional Prerequisites: None.
2. You must complete the following Manufacturing Focus courses, details on which may be found in (Appendix K):
1. ORIE 5100: Manufacturing Systems Design: A Consulting Boot Camp
2. NBA 5530: Accounting and Financial Decision Making; or
   NBA 5020: Managerial Accounting and Reporting
3. ORIE 5920: Enterprise Engineering Colloquium
3. You must complete 9 or more credit hours of concentration-specific electives, found in Appendix L.
   Among these, certain classes are mutually exclusive and may not be taken together:
   1. CEE 5900: Project Management; or
      ECE 5830: Introduction to Technical Management; or
      SYSEN 5930: Project Management and Leadership for Complex Systems
   2. ENGMT 5940: Economics and Finance for Engineering Management; or
      SYSEN 5140: Economic and Financial Decisions for Engineers
   3. NBA 6410/6420: Supply Chain Strategy/Analytics sequence; or
      ORIE 5126: Principles of Supply Chain Management
4. Courses from the Manufacturing Focus or Electives lists may also be counted towards the ORIE Core requirements.
Strategic Operations
The keystone of the Strategic Operations concentration (commonly called the Semester in Strategic Operations or SSO) is the SSO Practicum offered by the Johnson School. Taken in conjunction with related courses, the SSO Practicum provides a comprehensive look at how business and operations strategies are aligned and executed for success, including product design, logistics, quality control, corporate organization, employee organization and compensation, marketing, and globalization. Graduate students from the College of Engineering, the Johnson School, and the School of Industrial and Labor Relations participate.
SSO course material is integrated with company site visits and team-based project work with industry partners. The ORIE MEng project requirement is fulfilled within the context of the SSO framework.
You should plan to complete most or all of your Core requirements during your Fall semester, as the majority of the SSO-specific programming is only offered in the spring.
1. Additional Prerequisites: Strong background in operations research and/or relevant professional experience.
2. You must complete the following Strategic Operations courses:
1. ORIE 5126: Principles of Supply Chain Management
   May also be counted towards your Core.
2. NCC 5080 (or NCC 5580): Managing Operations
3. NBA 6500: Strategic Operations Immersion Practicum
3. You must complete 3 or more credit hours of concentration-specific electives, found in Appendix M.
   You may enroll in courses outside of SSO during your spring term, so long as the courses do not conflict with site visits or other mandatory SSO activities.
4. You may count up to 12 SCJ courses, instead of the 8 allowed for other concentrations. All SSO-required courses count towards this total.
Systems Engineering Minor
The Systems Engineering Minor prepares students to meet the increasing need from industry for engineers who go beyond the expertise in a particular engineering discipline. Within this minor program, students with diverse interdisciplinary skills integrate engineering system components, ensure total system operability, and evaluate various economic forces in the marketplace.
1. Additional Prerequisites: None.
2. You must complete the following courses, details of which may be found in Appendix N:
1. ORIE 5140: Model Based Systems Engineering
2. ORIE 5142: System Analysis, Behavior, and Optimization
3. CEE 5900: Project Management
3. You must complete both semesters of SYSEN 5900.
   This project course is central to the minor, and requires significant time commitment throughout the academic year. Most team projects encompass system design, analysis, integration, implementation, and participation in competitions.

Conduct

The Cornell University Student Code of Conduct establishes expectations applicable to all students. The Code centers around the core values of: purposeful discovery, free and open inquiry and expression, a community of belonging, exploration across boundaries, and changing lives through public engagement. The full text of the code is available here.

Every MEng student is expected to exhibit courteous, professional, and honest behavior in all aspects of their role as a Cornell student, including but not limited to all communications with faculty, staff, alumni, recruiters, project partners, and fellow students. Discourteous, negligent, or deceitful behavior may result in action being taken against the student in accordance with Cornell University policy. In extreme cases, a student may be required to withdraw from the MEng program.

Cornell University is committed to providing a safe, inclusive, and respectful learning, living, and working environment for its students, faculty, and staff members. If you have any questions or concerns about incidents involving potential sexual harassment, assault, gender discrimination, or other related forms of violence, please visit the Sexual Harassment and Assault – Response and Education (SHARE) website. This site offers information about SHARE partners who provide services, support, reporting options, education, and advocacy.

For immediate reporting of conduct concerns, please see ORIE department leadership or, in an emergency, contact the Cornell Division of Public Safety by telephone at 911 or 607-255-1111.

Academic Integrity

The School of Operations Research and Information Engineering adheres to the policies and procedures of the University on academic integrity. MEng students are subject to these policies and procedures. Take time to familiarize yourself with the complete Code of Academic Integrity. The rapid growth of online resources and natural language processing resources can complicate maintaining integrity. Further, specific academic integrity rules may vary from course to course.

If you ever are in doubt of the rules, consult your instructor before submitting the assignment. Don’t guess! The process for adjudicating integrity violations is stressful and time-consuming for students and faculty alike and is easily avoided by up-front communication.

Early Admission for Cornell Undergraduates
The Early Admit Pathway is designed for high-performing Cornell seniors who have completed the vast majority of their undergraduate-level coursework and hope to get a head start on completing their MEng degree.
Provided that the eligibility requirements are met and your admission to the program is approved, you will register as an undergraduate student for your final semester as an undergraduate, but you are able to enroll in and count credits towards your MEng degree as appropriate. This is referred to as your "hybrid" semester.
During your hybrid semester, each course that you take may count towards either your Bachelor's or your MEng, not both. See the Transfer Credit section below for details.
You will be considered an undergraduate for financial aid purposes and will not pay MEng tuition rates until you matriculate as a full-time MEng student. If you are receiving United States Federal Student Aid, you must be enrolled in at least 6 credits which count towards your Undergraduate degree to retain that aid.
Matriculation to the MEng program is expected the semester immediately after your hybrid semester. Attempts to defer matriculating as an MEng student may jeopardize any credits earned during that semester.
Eligibility requirements are maintained by the College of Engineering, which has stated that an eligible student will:
1. need between one (1) and eight (8) credit hours to complete their bachelor's degree during their hybrid semester, including any special designations;
2. submit and obtain Graduate Field Administrator approval of an early-admit pathway petition;
3. apply for early admission by the published deadlines (generally, by October 1 for spring early admit and December 1 for the following fall early-admit); and
4. complete their bachelor's degree by the end of their hybrid semester.
Academic Advisors

Each MEng student will be assigned an academic advisor just prior to the start of the fall semester (or spring semester for spring admits). You should contact your advisor as soon as possible for advice on course selection and study plan approval.

Arrival on Campus

The ORIE MEng program is in-person, rigorous, and fast-paced. Therefore, it is important that all students arrive on campus with ample time to get settled and start your studies.

All ORIE MEng students, regardless of concentration or campus, are required to arrive by the first day of classes. If you are unable to arrive by the first day of classes, contact the Graduate Field Administrator in advance to discuss the delay and whether a leave of absence or withdrawal is appropriate. The College of Engineering provides information about Leaves and Withdrawals on their website.

If you have not attended any of your classes in-person during the first week and you have not requrested a voluntary leave of absence or withdrawal, ORIE will begin the withdrawal process for you.

In addition, newly-matriculating ORIE MEng students and fall early-admits (fall hybrid semester) are expected to be on the Ithaca campus by the beginning of M.Eng Connect, which is held the week before classes begin. The report date is stated in your admission offer letter. You will be checked in at MEng Connect, where you will receive your Student ID if you are new to Cornell. If you do not check in for MEng Connect and have not indicated that you are going to be late, ORIE will begin the withdrawal process for you.

Registration and Course Enrollment

As an ORIE MEng student, you are required to register every semester in order to gain access to campus resources. To qualify as a registered student, you must:

1. Complete course enrollment;
2. Settle all financial accounts, including the current semester tuition;
3. Satisfy New York State and university health requirements; and
4. Clear any and all holds from the College of Engineering, the Graduate School, the Judicial Administrator, Cornell Health, and the Bursar’s Office.
5. Be physically present at the appropriate campus.

You can check your registration status and view your holds by visiting Student Center. Upon arriving to campus, students should check in with the Graduate Field Administrator to ensure that ORIE has all necessary documentation.

In general, all Bursar holds must be cleared before a student will be allowed to enroll in classes. See the Registrar Calendar for the complete timeline of course enrollment and add/drop deadlines for the academic year. Note that certain courses may not be available for enrollment until the semester begins.

Petitions
We recognize that flexibility is sometimes necessary when unusual circ*mstances arise. Please use this petition form to do the following:
1. Request for a course to satisfy Core requirements
2. Request for a course to satisfy Concentration/Elective requirements
3. Request for a course's credits to count towards your MEng degree
4. Change your Concentration
5. Extend your program a third semester (International students: see Extending Operations Engineering Programs to a Third Semester below)
6. Waive a program requirement (Colloquium, Practicum, etc.)
7. Wave a Core Area requirement
The above are all processes that happen at the Department level. The College of Engineering Registrar handles petitions related to enrollment and student status, and they keep a list of relevant petitions on their website that allow you to request the following:
1. General Petition
2. Enrollment Petition
3. Release of Information Form
4. Over 20 Credits in One Semester Petition
5. Time Conflict Permission Form
Extramural and Transfer Credits

You may transfer up to 9 credit-hours towards your ORIE MEng degree, provided that all of the following apply:

1. The credits were earned at any of Cornell's colleges or divisions;
2. The credits are letter-graded;
3. The credits are not applied to any other degree or credential;
4. The credits satisfy ORIE MEng Degree Requirements;
5. You have obtained program approval within three weeks of the start of your first MEng semester or hybrid semester, whichever is earlier.

For Early Admit students, any transferred credits are distinct from those earned during your hybrid semester. However, you are only able bring a maximum of 15 credit hours from your time as an undergraduate with you; e.g. if you are taking 8 credits of MEng coursework during your hybrid semester, you can only transfer a maximum of 7 credits from prior semesters.

Decisions concerning the denial of transfer credits are final and may not be appealed to the MEng Academic Committee. No other transfer credits are accepted by ORIE.

Transfers Between Cornell MEng Programs

The College of Engineering sets the policy for transfers between Cornell MEng programs. Upon accepting an offer of admission to an MEng program, students are required to register in that program for at least one semester and are expected to make progress towards the degree requirements for that program. Students who wish to transfer to another MEng. program after their first semester must inform and receive approval from both programs. Approval depends on several factors and is not automatic. Students seeking this approval should consult with the ORIE MEng Director. If approved, the transfer will be effective at the beginning of the subsequent semester. Other transfer rules apply as outlined in the College of Engineering Rules for the Master of Engineering Degree. Financial aid in the form of fellowships and scholarships will need to be reviewed to determine if it is transferable.

Changing Concentrations

Within the ORIE MEng program, there are limited options to change concentrations after admission. Changes into the Financial Engineering concentration are not permitted. Requests for changes into the other concentrations/minor will be considered on a case-by-case basis and require the approval of the faculty advisor and ORIE MEng Director.

Extending Operations Engineering Programs to a Third Semester

Like other professional graduate degrees, the MEng has a planned program timeframe. Barring unforeseen emergencies, major illnesses, or other extreme circ*mstances, you are expected to complete your degree requirements on schedule with your cohort. For ORIE Operations Engineering MEng students, this means finishing in two semesters. However, it may be difficult to complete the requirements for a particular concentration in two semesters because of gaps in your background and/or the sequence and timing of courses offered.

In most cases, the School of ORIE will allow an MEng student to pursue a third semester of study, provided that they follow the extension request process outlined on the associated petition form and submit all necessary documentation prior to the stated deadline, which is usually the Friday following April 15.

International students should pay particular attention to the extension guidelines presented by Cornell’s Office of Global Learning.

Any ORIE MEng student who extends their program to a third semester is subject to additional academic requirements and costs, as detailed next. You must accept responsibility for meeting these additional requirements and costs as a condition of having your Extension Request approved.

Academic Requirements for Program Extensions:

1. You must complete a minimum of 12 credit hours of coursework.
2. At least 6 must be letter-graded credit hours that count towards your MEng Degree.
3. At least 3 of those must be in ORIE department-labelled courses.
4. You may enroll in SCJ courses during your extended semester, however the limit on countable SCJ credit hours from your concentration still applies.
5. At most 1 course may be Audited.
   Audited courses do not count as credit hours.

Costs associated with an Additional Semester of MEng Study:

MEng students who request Program Extensions are not eligible for pro-rated tuition and should expect to pay for a full additional semester of study, including tuition and fees, living expenses, and student health insurance. If you are an international student, financial certification may be required as part of the I-20 extension process.

Extensions are not available to FE students due to the design of the CFEM semester.

The ORIE MEng degree is a self-funded investment in yourself and your future that will pay off both financially and with enhanced career opportunities. Over the past several years, not only has the ORIE MEng average starting salary been $10,000-$15,000 higher than the average starting salary for our undergraduates, but MEng students often enter the professional arena with a higher status or an advanced trajectory because of their additional training and experience.

The current tuition and fees for the ORIE MEng program may be found on the University Bursar's website under the Master's Degree (Tier 1) entry.

Cornell also offers a convenient installment plan to pay tuition and certain other bursar billed items. For more information, see the Cornell Installment Plan (CIP) site, or contact the Bursar directly at 607-255-2336.

Two types of financial aid are available to MEng students: merit-based aid and need-based aid. Only merit-based aid is made available to professional degree students via the School of ORIE and the College of Engineering. Need-based aid for professional degree students comes primarily from federally or privately funded loan programs. Each is described in more detail below. In addition, students may seek part-time employment to help defray program expenses.

1. Merit-Based Financial Aid

All applicants to the ORIE MEng program are automatically considered for merit-based financial aid as part of the admissions process. There is no separate aid application – you should highlight your achievements and contributions on your application to the program itself. Merit-based aid for ORIE MEng students primarily comes in the form of partial tuition fellowships, and are largely funded via donations from generous alumni.

The College of Engineering also offers the Knight Scholarship, a program for MEng students who are interested in a future MBA degree from the Johnson School. You may indicate interest on your application to the program, and will be contacted about your essay prior to the deadline if you choose not to upload it with your application itself. Knight Scholarship applications are typically due February 1st, while the Fall cycle application deadline is December 1st.

MEng financial aid is awarded on a discretionary basis, based on applicants’ qualifications and the availability of funds.

2. Need-Based Financial Aid

Cornell currently participates in two federally funded student loan programs: the William D. Ford Direct Loan and the Federal Graduate PLUS loan. These programs are available to U.S. citizens and permanent residents who are matriculated toward the degree. More information may be found at the Graduate School Fellowships page.

For underrepresented United States citizen students, the GEM Engineering Fellowship provides financial assistance and a paid summer internship. This fellowship covers tuition, fees, and provides a stipend for living expenses for the graduate academic year. Note that the MEng degree may not be explicitly mentioned on some of their materials, but MEng students are eligible.

There are currently no need-based programs for international students administered by the University or the Department.

3. Employment Opportunities

Any student who can prove their identity and eligibility to work in the United States can explore part-time jobs available on or off campus. Non-work study positions are listed by the Office of Financial Aid and Student Employment.

Course assistantships are available to MEng students on a limited basis. These are hourly positions with varying responsibilities, but MEng students are typically designated as Course Assistants, not Graders. Depending on availability, the Graduate Field Administrator will contact qualified students approximately one month before a semester begins.

ORIE MEng students are able to hold assistantships in other departments, but individual departments have their own recruitment priorities and procedures.

Legally, as a full-time student you can work up to 20 hours per week. That said, you should not work over 10 hours per week due to the rigor of the program and the time commitment of searching for employment. Historically, students who have attempted to manage a 20 hour workload alongside their responsibilities as an ORIE MEng student have found themselves seriously underperforming in both.

Career Services

The MEng Programs Support Office, the Cornell Engineering Career Center, and the University Career Services Offices all offer programming for MEng students on how to approach the job search, resume preparation, interview preparation, and more.

In addition to organizing Cornell Career Days in September, these offices offer extensive on-campus opportunities to connect with hundreds of companies each year. Plan to take advantage of the extensive opportunities available to enhance your job search skills and make contact with employers. Upcoming sessions and workshops will be posted online. You should plan to prepare for recruiting early since interviewing begins early in the fall semester.

Health and Counseling Services
The demands of the ORIE MEng program can make it difficult at times for students to maintain a healthy work-life balance. Getting sufficient sleep, maintaining a healthy diet, and exercising can make an enormous difference in your graduate school experience. For more information about available resources, please see the Graduate Field Administrator, or visit:
• The Cornell Health Center
• Cornell Fitness Centers
• Cornell Mental Health Care
Student Organizations
There are hundreds of student clubs and organizations at Cornell for individuals with special professional or social interests, which can be found at the .
Specific groups frequenty of interest to all ORIE MEng students are:
• MSLC - Each year, nominations are solicited from the ORIE MEng class for candidates to serve on the MEng Student Leadership Committee. The members of this committee organize social events and outings, arrange for industry speakers, and collectively act as spokespeople for the ORIE MEng class. If you are interested in being a member of the committee, please contact the MEng Program Director.
• INFORMS - The Institute for Operations Research and the Management Sciences is the flagship organization for Operations Research and Analytics professionals. The Cornell student chapter of INFORMS serves the purpose of introducing students to the professional aspects of the field, career opportunities, and a variety of social activities. MEng students are welcome to join the Cornell INFORMS chapter. Through guest speakers from industry and a variety of activities, members benefit from the opportunity to meet other students and professionals and to learn about the latest developments and opportunities in ORIE. The national INFORMS organization offers career-related information, including job postings, career fairs, and other valuable resources.
• SWE - The Society of Women Engineers is a professional, non-profit, educational service organization of undergraduate and graduate engineers and men and women with equivalent engineering experience. The Cornell Student Section of SWE promotes women in Engineering by advocating for the importance of diversity and by uniting resources to encourage academic, leadership, professional, and personal excellence for the entire Engineering community of Today and Tomorrow. Every year Cornell’s SWE chapter hosts numerous programs and events that are of interest to MEng students, including over 100 company information sessions.